Exiting Setup Mode; Setup Menu Navigation - Mettler IND231 Manual De Instrucciones

2.1.2.

Exiting Setup Mode

To exit the setup mode and return to the weighing mode:
1. Press the
2. Use
3. Once the selection has been made, there are two options:
2.1.3.

Setup Menu Navigation

2.1.3.1. Key Functions
After entering setup, the F1, F2, Zero and Tare keys become navigation keys, and are used to move
around in the menu structure and to adjust settings once a parameter settings screen has been
reached.
2-2 METTLER TOLEDO IND231/IND236 Quick Guide
Figure 2-2: Setup Switch Location on Terminal Main Board
key, or left
message will appear asking whether to Abort or Save changes Figure 2-3.
Figure 2-3: Prompts When Exiting Setup
(down) and
• Save: Save the setup parameters.
•
Abort: Do not save the setup parameters.
or Confirm choice of Save or Abort, and exit to main screen.
Remain in the setup menu, at F1.
Back to next higher menu
Left
screen
when in the root of the menu tree (F1, F2, etc. displayed). A
(up) to switch between Save and Abort.
Menu Structure Settings Screen
Return to menu structure
or , if a numerical entry screen,
Move focus left
30100541 | 00 | 08/2013