Tacking - Janome Memory Craft 4900 Manual De Instrucciones

q w
29
e
w
e
START
STOP
r

Tacking

Machine settings
q Pattern:
w Presser foot:
e Thread tension:
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
To sew
Depress the foot control until the machine stops automati-
cally.
The machine will sew a tacking 1.5 cm (9/16˝) long auto-
matically.
q 1.5 cm (9/16 ˝)
q
To sew a shorter tack
To sew a tack shorter than 1.5 cm (9/16˝), first stop the
machine after sewing the required length e, and then
t press the reverse stitch button r.
The required length has been determined.
Restart the machine and continue sewing until the machine
stops automatically.
w Starting point
e Required length
r Reverse stitch button
t Tack length
To sew the same size tack
To sew another tack at the same size, simply restart the
machine and it will stop automatically when finished
sewing.
To sew a tack at a different size
To sew the next tack in a different size, press the memory
key and start sewing. Press the reverse stitch button after
sewing the required length.
The required length has been determined.
112
29 (mode 2)
Satin stitch foot F
AUTO