Use
NOTICE
Product not folded completely
Damage to product due to unintentional unfolding
► Fold the frame fully so the product stays together securely and does not unfold on its own or due to inadvert
ent external influences.
► For added stability, tie the frame tubes together with a cord.
The product can be prepared for storage or transportation in a passenger vehicle.
1) Set the product on its rear wheels and tilt it slightly to the back.
2) Press the tripod springs simultaneously on both crossbraces (see fig. 6) and fold up the frame completely in
the direction of the rear wheels (see fig. 21).
3) If necessary: Remove the 4 wheels together with the telescoping tubes (see fig. 7; see Page 32) to save
space.
4) For extended storage or transportation, put the product into the original carton.
21
8.4 Care
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Do not clean the product with a jet of water or a pressure washer. The penetration of water can cause corro
sion and subsequent malfunctions.
► Check the driving behaviour of the product after cleaning it.
8.4.1 Cleaning
Clean the product regularly depending on the degree of soiling and frequency of use, at least 1x per month:
Important information on cleaning
•
Use warm soapy water for cleaning. Add some disinfectant if needed. Carefully dab the product with a damp
cloth or sponge and wipe with a dry, clean cloth.
•
Do not use any aggressive cleaners, solvents or hard brushes etc.
•
Do not expose the product to direct heat (e.g. sunlight, stove or radiator heat).
8.4.2 Disinfection
•
Thoroughly clean the product before disinfecting.
•
Wipe all parts of the product with a disinfectant.
•
Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
38
Walkstar