Li­ion Battery Status Indicator; Technical Data - Hilti SB 4-A22 Manual De Instrucciones

3.5 Li­ion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Li­ion battery. Press either of the battery release buttons to check the charge state of the Li­Ion battery.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes.
1 LED flashes, the power tool is not in working or-
der.
4 LEDs flash, the power tool is not in working or-
der.
Note
Battery charge state cannot be indicated while the control switch is pressed and for 5 seconds after
the control switch has been released. If the LEDs of the charge state indicator flash, follow the
instructions in the 'Troubleshooting' section.
3.6 Items supplied.
Bandsaw, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com

4 Technical data

4.1 Bandsaw
Rated voltage
Ambient temperature
Weight
No-load speed
Max. cutting depth
Dimensions, bandsaw blade (Length x width x thickness)
5 Operation
5.1 Safe operation 4
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before changing
accessories.
▶ Press and hold down the two release buttons.
Printed: 12.06.2017 | Doc-Nr: PUB / 5310775 / 000 / 03
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: 10 % to 25 %
• Charge state: < 10 %
• The battery has overheated or is completely
discharged.
• The power tool is overloaded or has overheated.
SB 4-A22
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
9 lb
(4 kg)
548 ft/min
(167 m/min)
2.50 in
(63.5 mm)
28.875 in x 0.05 in x 0.02 in
(733 mm x 12.7 mm x 0.5 mm)
English 5