System Configuration - Belkin Wireless G Manual Del Usuario

Print Server Manager

System Configuration

Double-click the "System" icon and the "System" configuration
window pops up.
In the System configuration page, you can see all available printing
protocols and upgrade the new firmware for this Print Server.
Upgrade Firmware:
update the newest firmware of the Print Server. Click the "..." button
and select the correct firmware in your computer. After selecting
the firmware file, click the "Upgrade" button to finish the firmware-
update process.
Tip:
Before you upgrade the firmware, make sure
that the IP-address settings of the Print Server
are in the same network as your computer.
Load Default:
If you want to reset the Print Server to default factory
settings, click "Load Default".
You can use this "Upgrade Firmware" tool to
55 55
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17