J10 Radio Repeater Unit - Gardesa Biptronic Manual De Instrucciones

GB

J10 RADIO REPEATER UNIT

The J10 repeater unit provides a two-way radio transmission link
between Biptronic system components that are too far japart,
out of range or in areas with poor radio reception. The repeater
unit LED indicates alarm status when the system is armed.
NB: Only one repeater unit can be installed in each Biptronic
system.
INDICATOR LED
TECHNICAL DATA:
- Power supply: 1 lithium battery, 3.6V 3,3Ah size A
- Lifetime: 3 years with 2 alarm on/off cycles a day and a Biptronic
system thet generates 250 alarm messages a day
- Radio-wave transmitter frequency: 433 MHz
- Radio transmitter range: 10÷15 m in residential installations
- Receiver sensing range: 100dB
- Operating temperature: from - 10 to +50 °C
WORKING
When the alarm system has not been armed, the J10 repeater unit
only amplifi es door, siren, GSM dialer and shutter remote control
signals, turning on the LED as each message is received. When the
alarm system has been armed, the J10 repeater unit amplifi es the
signals received from all installed BIPTRONIC system components
, turning on the LED at each signal received. To perform this system
function, the repeater unit must be set from the door as the fi rst
component ahead of the sirens, GSM dialer and shutter remote
controls.
54
ANTENNA
MTPBB06-25 - Rev. 00