Connection To The Service Suction Socket (Cyclonic Suction); Starting The Vacuum Cleaner; Control Board - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

2

9.7.3 Connection to the service suction socket (cyclonic suction)

1. After lifting the closing cover, insert directly, if needed, the fl exible hose (G) in the service suction inlet
(D), identifi ed in the drawing
D
G

10 STARTING THE VACUUM CLEANER

10.1 Control board

The R-EVOLUTION vacuum cleaner features a control board from which the appliance functions can be
programmed by means of a simple operator's interface display with 6 function keys.
From the control board (display) it is possible to control and set the routine maintenance operations; the
vacuum cleaning sockets are distributed in the various rooms and connected through the pipe network.
For this reason, the operator is never directly in contact with the appliance while the system is working,
apart from starting operations (see paragraph 11.3.1) and use of the vacuum cleaner (see paragraph
11).
27
21/01/16 Rev:3.0.0