Display Controls - Hisense FMN544I20S Manual De Instrucciones

16

Display Controls

Use your appliance according to the following control guidelines. The control panel on the
top cover shows in the diagram below, it may be different depending on the model.
When the appliance is powered on for the
first time, the backlighting of the icons on
the display panel starts working. If no
buttons have been touched or the doors
are closed, the backlighting will turn off
after 60 seconds.
The control panel consists of two areas
about temperature, and one area about
different modes.
Caution!
When you set a temperature, you set an
average temperature
refrigerator cabinet. Temperatures inside
each compartment may vary from the
temperatures displayed on the panel,
depending on how much food you store
and where you place it. High or low room
temperature may also affect the actual
temperature inside the appliance.
" " " " I ce Control
This button controls the ice maker. You
can touch "Ice On " button to control the
ice maker. When the "ice On " function
light is on, the ice maker is working. If you
want to turn off the ice maker, please
touch the "Ice On " button again.
" " " " S uper Freeze
If you want to decrease the time needed to
freeze products in the Freezer, please
touch this button, the super cool icon
for the whole
" " " "
" " " "
" "
will be illuminated, the fridge temperature
setting displays -24
℃
Super Freezer can quickly lower the
temperature and freeze your food faster
than usual. This can retain more of the
vitamins and nutrition in fresh food and
keep your food longer.
The super freeze option allows you to
freeze the maximum amount of possible.
We recommend that you let the appliance
operates for 6 hours first. Super freeze
automatically switches off after about 52
hours, and the freezer temperature setting
will revert back to the previous setting.
When the super freeze function is on, you
can touch " S uper Freeze
to switch off. And it will not retain the
Super Freeze function when power off.
" " " " W ater Filter " " " "
In general, you should change the water
filter every 6 months to ensure the highest
possible water quality.
After the refrigerator has dispensed about
1000 gallons of water(used the water filter
for about 6 months), the filter icon
will blink, that remind you need to replace
the water filter.
First of all, you need to purchase a new
water filer. You can purchase the new filter
from the retailer where you purchased
your refrigerator or the after-sales service
system. Before that please check that the
new filter is the same filter type as before
.
" button again
" "