Fault Table; Normal Maintenance; Technical Data; Dimensions - Aqua Power AQE 8 Operación E Instalación

INSTALLATION

NORMAL MAINTENANCE

8.2 Fault table

Symptom Possible Cause
No hot water circuit breaker off
safety thermal cut-out
tripped
not enough flow rate
to activate appliance
Not enough hot filter screen clogged
water
Water not hot water flow too high
enough
 If you are not able to resolve a problem please contact us,
(see front or rear cover), before removing the appliance
from the wall. Aqua Power is happy to provide technical as-
sistance. In most instances, we can resolve the problem over
the phone.
9. Normal maintenance
Aqua Power tankless water heaters are designed for a very long
service life. Actual life expectancy will vary with water quality
and use. The appliance itself does not require any regular main-
tenance.
However, to ensure consistent water fl ow, it is recommended
to periodically remove scale and dirt that may build up at the
aerator of the faucet(s), the fi lter screen in the appliance, or in
the shower head.
8 | AQE TANKLESS ELECTRIC WATER HEATERS
 Solution
turn circuit breaker on
reset thermal cut-out
clean filter screen at ap-
pliance
clean faucet aerator or
shower head
clean filter screen at ap-
pliance
reduce water flow rate until
light on front cover stops
blinking
supply correct voltage to
appliance

10. Technical Data

10.1 Dimensions

b01
c06 c06 c01 c01
100 (3.94")
200 (7.88")
b01 Electrical cable entry
c01 cold water inlet
c06 hot water outlet
38 (1.5")
110 (4.33")
"NPT 1/2
"NPT 1/2
WWW.APTANKLESS.COM