Chase Operation; Rgb Offset Operation - Chauvet DJ Obey 4 Manual De Instrucciones

Chase Operation

This controller has preset color chases. There are several color combinations to choose from.
Please see the instructions below for this operation.
Chase Selection
Please be sure that the Strobe & Blackout functions are not overriding the controls.
Sound will function in Chase Mode.

RGB Offset Operation

This controller has a built-in color fade program that will chase between fixtures sequentially: 1–4,
continuously Please see the instructions below for this operation.
Sound will function in RGB Offset Mode.
Please be sure that the Strobe & Blackout functions are not overriding the controls.
4. Operating Instructions
1. Select one or more <FIXTURES>.
2. Press <CHASES> until the appropriate LED indicator lights.
3. Use the <PRESET COLORS> to select a chase. See the chart below for a description on
which button triggers which chase.
4. Adjust the <SPEED TIME> to the desired level to set the speed time.
5. Adjust the <FADE TIME> to the desired level to set the fade time.
6. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
7. <WHITE DIMMER> may be adjusted; however, it will not be affected by this mode.
Use the following <PRESET COLORS> to select the corresponding chase.
Red: Red/Green
Orange: Green/Blue
Yellow: Red/Blue
Green: Red/Cyan
Cyan: Green/Magenta
Blue: Yellow/Blue
Purple: White/Blackout
Magenta: Color Cycle
White: Yellow/Magenta
1. Press <RGB FADE> & <AUTO> simultaneously.
2. Adjust the <SPEED TIME> to the desired level to set the speed time.
3. Adjust the <FADE TIME> to the desired level to set the fade time.
4. Adjust the <MASTER DIMMER> to the desired level to set the intensity.
5. <WHITE DIMMER> may be adjusted; however, it will not be affected by this mode.
11