AKG C 411 Modo De Empleo página 17

1. Connecting the cable: Push the mini XLR
connector (1) on the pickup cable into the mini
XLR socket (2) on the cable of the MPA III L (3)
to the stop.
The connector will lock automatically.
MPA
Phantom
Fig. 4: Connection diagram with MPA III L.
Disconnecting the cable: Refer to section
2.3.1 above.
2. Connect the MPA III L (3) to a balanced XLR
microphone input with phantom power.
3. Switch the phantom power on. (Refer to the in-
struction manual of the unit to which you
connected your pickup.)
4. If your mixer provides no phantom power:
Connect the MPA III L (3) to an optional AKG
phantom power supply (4) (N 62 E, N 66 E, B 18,
B 15) and use an XLR cable (5) (e.g., an optional
MK 9/10 from AKG) to connect the phantom
power supply (4) to the desired balanced input.
Refer to the manual of your bodypack transmitter.
Mini XLR Mini XLR
2 Interfacing
2.3.2 Using the
MPA III L
Refer to fig. 4.
MPA
Refer to fig. 4.
2.3.3 Connecting
to a Bodypack
Transmitter
17