Questions And Answers - SOMFY Sunis Indoor Wirefree RTS Guia De Instalacion

Questions and answers

Fault
The shutter/blind
does not react
to sun and/or
temperature
The shutter/blind
moves too
frequently
The shutter/blind
reacts incorrectly
The shutter/blind
does not react to
the sun or only
moves in one
direction
For any additional information, please contact your dealer or our
technical assistance
Page 16
Cause
The sensor is off.
The sensor has not been
programmed.
The threshold values have
been incorrectly set.
The battery is weak.
The sun sensor cover is
dirty.
The sensor is incorrectly
positioned.
The sensor is in demonstra-
tion mode.
A bright light source is
affecting the sensor.
There is no favourite position
("my") programmed into the
motor.
Pages 62, 63
Copyright © 2008 Somfy SAS. All rights reserved.
Deletion
Switch the sensor on
Page 9
Program the sensor
Page 10
Correct the threshold values
Page 12
Replace the battery
Page 14
Clean the cover
Page 5
Reposition the sensor
Page 8
Change the sensor to normal
mode Page 13
Switch off the light source and
select a new location
Program the "my" position
( corresponding installation
instructions)
or set the sensor to mode 1 .