FTE Maximal ATLAS 64 Manual De Instalación Rápida página 30

Quick installation Guide ATLAS 64
Service Settings
Allow choose the output services in the outputs mux and their settings.
Add an output service.
Use the next settings to add an output service.
Tuner: Select in the list the number of tuner where it is received the service to add in the output.
Name: Choose in the list the name of service.
CI: Select the routing of the service. Choose between the next values: FTA, CAM1 and CAM2.
Priority: Allows prioritize some services to ensure the best quality on your TV, in the case of
overflow in the output, because the bandwidth in the output is limited. It is advisable not to
exceed 30% the total number of services to be prioritized in each multiplex.
New SID: In this option is possible change the service ID. If leave in blank keep the original
service ID after was added.
LCN: Type here the logical channel number to sort the channels in the compatible receivers
with this option.
Finally do a click in the image to add the service. If the service was added in this mux or
another mux appear a warning message and it can be not added again.
After add a service, it is possible edit the value of the CI, New SID and LCN. The option Enable
must be checked to permit the service in the output.
PID filtering
Click in the image V in the right side of the Enable. With that show the list of PID of the service.
If check the option Blocked in the same row of the PID, the PID will be not in the output. This
option could be permit save bandwidth removing for example teletext or other PID not used.
Click in the image to update the new settings of the service.
Do clock in the image to update the new settings in several services in the same time.
Delete services
To delete a service do click in the image .
To delete all service do click in the image .
11
- -
All right of technical changes and mistakes are reserved. ATLAS 64 Version en_1.1 Fte maximal