FTE Maximal ATLAS 64 Manual De Instalación Rápida página 29

6.3. Menú Output
6.3.1. MUX
In this section can be change the settings of the output modulation, Transport stream settings
and can be choose the output services of each mux.
Modulation Settings
DVB-T Settings
1
Frequency (KHz) : Type the centre frequency of the mux in KHz. For example the channel 21
will be 474000. See the Annex 1 in the page 15 for details.
1
Bandwidth : Select in the list the bandwidth. The options available are 6, 7 and 8 MHz.
Constellation: Depending of the output modulation it is possible choose one option in the list.
DVB-T: QPSK, 16 QAM and 64-QAM.
DVB-C: 16-QAM, 32-QAM, 64–QAM, 128-QAM and 256-QAM.
1
Baud Rate (MBd)
Select between 1.000 until 7.000
Code rate (Option only for DVB-T): The values available are: 1/2, 2/3, 3/4, 5/6 and 7/8.
Guard Interval (Option only for DVB-T): The values can select in the list are: 1/4, 1/8, 1/16 and
1/32.
1
Level : Select a value between 69 dBuV and 84 dBuV (-40 dBm to -25 dBm).
Press the button Apply to confirm the new adjustment.
Remark
1
: The setting only can be changing in the Mux 1.
2
The higher value could be under 7.000, if the bandwidth is lower than 8 MHz
Transport Stream Settings
Here can type the transport stream ID. The value is between 0-65535. Press
the button Apply to confirm.
Status
Show the output bandwidth of the mux.
All right of technical changes and mistakes are reserved.
Quick installation Guide ATLAS 64
(Option only for DVB-C): Choose the value of the baud rate (symbol rate).
2
.
DVB-C Settings
10
- -
ATLAS 64 Version en_1.1 Fte maximal