EN
22
How to set the temperature
The adjustable temperature for the device is in a range of 5–22 °C (40-72 °F).
The temperature will be increased by 1 °C / 1 °F when you press the [+] key once
and decreased by 1 °C / 1 °F when you press the [-] key once. To display the set
temperature during operation, press the [+] or [-] button. The set temperature will flash in
the display for 5 seconds. The stored temperature is shown in red.
NOTE: If the device is unplugged, the power is cut, or the device has been turned
off Wait 3 to 5 minutes before restarting the device. If you try to start it before this
time, it will not start. If you are using the device for the first time or after it has been
switched off for a long time, the display may show a deviation between the selected
temperature and the displayed temperature. This is normal and is because the device
must first cool down. As soon as the device runs for a few hours, the temperature will
normalize.
Notes on storage quantity
Bottles can differ in size and dimensions. The actual number of bottles that you can
store may vary. You can place 18 standard bottles on the curved wine shelves and 58
12-ounce cans on the flat drink shelf.
Door lock
Your device is equipped with a lock and key. The keys are in the plastic bag that also
contains the manual. Insert the key into the lock, and turn it counterclockwise to unlock
the door. To lock the door, turn the key clockwise until the metal pin is fully engaged.
Remove the key and keep it in a safe place.
Notes on the shelves
To avoid damaging the door seal, make sure that the door is fully open when the shelves
are pulled out. Pull out the shelves to make the cabinets easier to fill. To prevent the
shelves from being pulled out too far, there is a stopper on the side of each shelf.
If you wish to remove the shelf completely, remove all bottles and drinks from the shelf.
Then pull the shelf out until the stopper blocks it. Now lightly lift the shelf to remove it. To
reinsert the shelf, perform these steps in reverse order.