Installation - Klarstein 10031694 Manual De Instrucciones

EN
18

INSTALLATION

Before installation
• Remove the packaging material completely, inside and out.
• Check that the following parts have been included:
• User manual
• 6 wine shelves (curved)
• 4 drink shelves (flat)
• 2 keys
• Before connecting the device to the power supply, allow it to stand for 2 hours. This
reduces the possibility of malfunction in the cooling system.
• Clean the inside of the device with a soft damp cloth.
Installation (freestanding)
• The device can be installed built-in or freestanding.
• Place the device on a surface that can support the device with full load. Adjust small
bumps with the adjustable feet on the bottom of the wine cooler. The device must be
straight.
• Place the device in a location where it is not in direct sunlight, and away from heat
sources (oven, heating, radiators). Direct sunlight can affect the acrylic coating,
and heat sources can increase electrical consumption. Extreme cold ambient
temperatures may cause the device to malfunction.
• Do not place the device in damp rooms.
• Only connect the device to grounded sockets. If you are not sure whether your
connections meet the requirements, consult an electrician.