Top View - Rohde & Schwarz ZPH Manual De Instrucciones

®
R&S Cable Rider ZPH
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument. For
example, cleaning agents that contain a solvent may damage the front
panel labeling, plastic parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc.), acids,
bases, or other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lint-
free dust cloth.
4.2

Top View

Power meter input
The build-in power-meter provides a maximum power measurement of 30 dBm
(or 1 W) at the RF input port. Connect a cable or DUT to the RF input with an N-
type connector. Use a cable to connect the DUT to the R&S Cable Rider ZPH, if
necessary.
USB type A connector
The USB port provides the USB interface to connect a memory stick and store
data sets or screenshots. It can also be used to control the operation of the exter-
nal power sensor.
RF out / Reflection
The RF out connector provides a signal source output power of the R&S Cable
Rider ZPH at -10.00 dBm nominal. It is also used as a 1-port reflection measure-
ment.
Getting Started 1321.0944.02 ─ 04
Instrument Tour
Top View
20