Entanglement With Shoulder Belt; Carrying And Transport - Harmony HMYFLDHBB-S3 Manual De Instrucciones

! It is recommended that any straps holding the
restraint to the vehicle should be tight, that any straps
restraining the child should be adjusted to the child's
body, and that straps should not be twisted.
! BOTH SIDES OF THE LAP BELT AND THE LOWER END OF THE
SHOULDER BELT MUST PASS UNDER BOTH ARMRESTS.

ENTANGLEMENT WITH SHOULDER BELT

! WARNING: To avoid possible entanglement and choking
with your vehicle's shoulder belts, Harmony Juvenile
Products recommends that the following precautions
are taken when installing your booster seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the seat belt retract until it is snug against
your child.
3. ENSURE that the seat belts do not press on the child's
flesh or push the child's body into an unnatural position.
4. Do the same for all unused vehicle seat belts.
! Teach your child that seat belts are not toys and should
NEVER be played with, regardless of whether the car is
in motion or not.
! ALWAYS be aware of what your children are doing in
the back seat.

CARRYING AND TRANSPORT

1. Fold the headrest (see "Unfolding/Folding headrest").
2. PARTIALLY fold the backrest (see "Unfolding/Folding
booster seat"), and place the folded headrest on the
booster seat base with the TOP of the headrest facing
the Harmony logo.
3. Secure Locking Strap (see "Parts list").
4. Use carry handle for easy portability (see "Parts list").
24