System Features - Dell PowerEdge SC1435 Manual Del Propietário

System Features

The major hardware and software features of your system include:
• One or two dual-core AMD Opteron 2000 Series processors.
• A minimum of 1 GB (single-processor systems) or 2 GB (dual-processor systems) of 667-MHz
registered DDR-II memory modules. Memory is upgradable to a maximum of 32 GB by installing
combinations of 512-MB, 1-GB, 2-GB, or 4-GB memory modules in the eight memory module sockets
on the system board.
• Support for either two 3.5-inch, internal SATA hard drives or two optional 3.5-inch, internal SAS hard
drives. (An optional SAS controller card is required for SAS hard-drive support. This optional SAS
controller also supports RAID levels 0 and 1.)
• An optional slimline IDE optical drive.
• An optional external USB diskette drive.
• A 600-W power supply.
• Four dual-rotor fan modules.
The system board includes the following features:
• One of the following riser card options:
– A riser card supporting one x8 lane-width PCI-Express (PCIe) half-length expansion slot.
or
– A riser card supporting one 3.3-V, 64-bit, 133-MHz PCI-X half-length expansion slot.
This PCI-X slot also supports legacy PCI expansion cards.
• Two integrated Gb Ethernet NICs, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps data
rates.
• Four USB 2.0-compliant connectors (two on the system front panel and two on the back panel),
capable of supporting a diskette drive, an optical drive, a keyboard, a mouse, or a USB flash drive.
• An integrated VGA-compatible video subsystem based on an integrated ATI RN50 PCI video
controller. The video subsystem includes a minimum of 16 MB of graphics memory and supports
various 2D graphics video modes. Maximum resolution is 1600x1200 with 65,536 colors.
• Systems management circuitry that monitors operation of the system fans as well as critical system
voltages and temperatures.
• Back-panel connectors including serial, video, two USB connectors, and two NIC connectors.
• Front-panel connectors including a video connector and two USB connectors.
For more information about specific features, see "Technical Specifications" on page 9.
Getting Started With Your System
3