Troubleshooting - Astralpool LumiPlus DMX Manual De Instalación Y Mantenimiento

6. TROUBLESHOOTING

PROBLEMS
The display that indicates the DMX address
does not turn on
The green LED in the DMX modulator does
not light up
The projectors change colour or go out for a
few moments
If you are unable to solve the problem with these instructions, contact the technical department of AstralPool.
USUAL CAUSES
Current is not reaching the equipment
Defective DMX signal
Faulty power supply in the projectors or in
the DMX modulator
5
SOLUTIONS
Check the mains socket (230 V~ac) and the
24V DC
power line
Check the installation of the DMX line. Only
the line termination of the last DMX
equipment of the DMX communications bus
should be activated
24V DC
Check the power supply line of
the projectors and the DMX modulator