COMENDA Prime PB 24 Serie Instrucciones Para El Uso Y El Mantenimiento página 16

ENGLISH
2.1.c STARTING WASH CYCLE
IMPORTANT
T
he selection of starting MANUAL or AUTOMATIC
cycle must be made by an authorised technician.
STARTING AUTOMATIC WASH CYCLE
To start the wash cycle in AUTOMATIC mode (with
opening and closing of the door), the cycle start
mode must be changed.
IMPORTANT
T
his operation must be carried out by an authorised
technician during installation..
STARTING MANUAL WASH CYCLE
To start the wash cycle, touch the
START key.
The START key turns BLUE during
the entire duration of the wash cycle.
The countdown of the cycle appears on the display in
seconds.
The following phases are performed during a complete
cycle:
° WASH
° PAUSE/ DRAIN
° RINSE
* DRAIN
ATTENTION
I
t is recommended to check the level of the detergent
and rinse agent daily.
TERMOSTOP
F
or hygienic purposes, machine operation always achie-
ves the ideal rinsing temperature.
If the temperature is not suffi cient, washing is prolonged
automatically until the conditions necessary for ideal
rinsing are achieved.
The pause to reach the ideal temperature can be pro-
longed to a maximum of 8 minutes.
ATTENTION
W
hen the water in the boiler is not at the proper tempe-
rature, the temperature value of the SET RINSE water
FLASHES on the display.
The remaining time for the cycle to be completed also
appears on the display.
Once the set temperature value is reached, the countdown
resumes until the cycle is completed.
14
2.1.d Interruption of the cycle
The wash cycle can be interrupted temporarily in two ways
1) by opening the door acting
as EMERGENCY.
F1 appears on the display
When the door is reclosed, the
cycle resumes from where it
stopped.
2) By pressing the START button
during the cycle, the wash phase
reaches a set value, guaran-
teeing a minimum washing time.
START START
Once the wash cycle is com-
pleted, the SET temperatures
appear on the display.
The START key turns STEADY
GREEN.
At the end of the wash cycle, remove the dish rack and
shake it likely to remove the last drops remaining on the
washed items.
Leave the objects to try and remove them from the dish
rack with clean hands.
Set everything on hygienic and surely stable surfaces.
2.1.e DRAINING WATER FROM THE TANK
2.1.e .1 Drain for machines without drain pump
The water in the tank can be emptied at any time of the
day depending on the fi lth accumulated.
To perform this operation, pro-
ceed as follows:
- SWITCH OFF the dishwasher
by setting the START key to OFF
OFF appears on the display
- Release the overfl ow (14)
allowing the water to drain
completely from the tank;
- Extract the tank fi lter (15) and
clean it.
(example)
At the end of the cycle, put the
fi lter (15) and the overfl ow (14)
back into the respective seats
Part 2: Reserved for Operator
START START
START START
START START