Tabla de contenido
PREPARATION
PREPARATION
1.
2.
3.
4.
Read
and follow
the preparation
instructions
for your
mower.
All
fasteners
are in the parts bag. Do not discard
any parts or material
until the unit is assembled.
NOTE: In this instruction
book, left and right describe the loca-
tion of a part from the viewpoint of someone setting in the oper-
ator's seat.
_b
WARNING: Before doing any preparation or mainte-
nance to the mower, remove the wire from the spark
plug.
HOW TO REMOVE
FROM THE CARTON
To remove
the unit from the carton,
follow
the instructions
below.
Locate
the two tear tabs at the top of the carton.
Pull the tear tape no more than twelve inches at a time.
Re-grasp
the tear tape next to the carton
and pull again.
One the tear tape
has been
completely
removed
from
both
ends, remove
the top wood and set aside.
5.
Repeat
the process
on the tear tabs at the bottom
of the carton.
6.
Set the panels
aside.
7.
Move the shift lever to the neutral
(N) position.
NOTE:
See the Operation
section,
page 10, for the location
of the controls.
8.
If the
parking
brake
is engaged,
completely
depress
the
clutch/brake
pedal to release the brake.
9.
Move the lift lever to the highest
position.
CAUTION:
Check
the
bottom
of the
carton
for staples.
Remove
any staples
that are in the path of the tires.
10. Remove
the mower from the shipping
skid.
LOOSE
PARTS - CONTENTS
The fasteners
and other loose parts are shown
below.
The fasteners
are shown
full size. The quantity
is shown
in brackets
().
Literature
Kit
Side Discharge
Attachment
F-050607L
7
Tabla de contenido
