Tabla de contenido
OPERATION
HOW TO USE THE SPEED CONTROL
LEVER
The Hydrostatic
Drive is very easy to operate.
The drive system
has
a a clutch/brake
pedal on the left side (see Figure
10) and a speed
control
lever on the right side (see Figure
11).
The speed and direction
of travel
is controlled
by the speed
control
lever
(see Figure
11). Use the speed
control
lever to select
either
forward
or reverse.
HOW TO DRIVE FORWARD
1.
The automatic
drive disconnect
must be in the DRIVE
position (Figure 9).
2.
Completely
push the clutch/brake
pedal forward
to stop the unit
(see Figure
10). Keep your foot on the pedal.
3.
Move
the
speed
control
lever
to NEUTRAL
position
(see
Figure
11).
4.
Slowly
release
your
foot
from
the
clutch/brake
pedal
(see
Figure
10). Do not keep your foot on the clutch/brake
pedal.
5.
Move the throttle
control
to the FAST position
(see Figure
12).
Speed Control
Lever
\
\
\
J
J
6.
Slowly
push the speed
control
lever
forward
to the desired
speed
(see Figure 10). To reduce forward
speed,
slowly pull the
speed
control
lever
to the desired
speed.
Figure 10
Figure 11
HOW TO CHANGE DIRECTIONS / DRIVE IN REVERSE
1.
Always
disengage
blades
and look down
and behind
before
and while
backing.
2.
Move the speed
control
lever to the NEUTRAL
position
(see
Figure
12).
3.
To go backward, move the speed control lever to the REVERSE
position.
Throttle
Control Lever
Figure 12
F-050607L
15
Tabla de contenido
