Configuración Avanzada; Conceptos Básicos De La Cli - Dell PowerConnect 6200 Serie Guia Del Usuario

NOTA: si la primera y la segunda entrada de contraseña no coinciden, se solicitará al usuario que vuelva a especificarlas hasta que coincidan.
Paso 3:
Next, an IP address is set up. The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address
you use to access the CLI, Web interface, or SNMP interface for the switch. Optionally you may request that the system automatically retrieve
an IP address from the network via DHCP (this require that you have a DHCP server running on the network).
To set up an IP address:
Please enter the IP address of the device (A.B.C.D)or enter "DHCP" (without the quotes) to automatically request an IP address from the network
DHCP server (192.168.2.1):
>> 192.168.2.1<Intro>
Please enter the IP subnet mask (A.B.C.D or /nn){255.255.255.0}:
>> 255.255.255.0<Intro>
NOTA: si ha seleccionado DHCP anteriormente, el sistema no solicitará la máscara de subred IP, ya que el servidor DHCP proporciona esta información.
Paso 4:
Finally, set up the default gateway. Please enter the IP address of the gateway from which this network is reachable (for example 0.0.0.0): >>
192.168.2.100<Intro>
NOTA: si ha seleccionado DHCP anteriormente, el sistema no solicitará una puerta de enlace predeterminada, ya que el servidor DHCP proporciona esta
información.
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
User Account set up = admin
Password = **********
Management IP address = 192.168.2.1 255.255.255.0
Default Gateway = 192.168.2.100
Paso 5:
If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is
incorrect, select (N) to discard configuration and restart the wizard: [Y/N] y
Thank you for using Dell Easy Set up Wizard. You will now enter CLI mode.
Configuración avanzada
Conceptos básicos de la CLI
El comando help de los modos User EXEC y Privileged EXEC muestra los accesos directos del teclado. A continuación se muestra la pantalla de ejemplo del
comando help:
Console>help
HELP (AYUDA):
Special keys (Teclas especiales):
DEL, BS .... delete previous character (borrar el carácter anterior)
Ctrl-A .... go to beginning of line (ir al principio de la línea)
Ctrl-E .... go to end of line (ir al final de la línea)
Ctrl-F .... go forward one character (avanzar un carácter)
Ctrl-B .... go backward one character (retroceder un carácter)
Ctrl-D .... delete current character (borrar el carácter actual)
Ctrl-U, X .. delete to beginning of line (borrar hasta el principio de la línea)
Ctrl-K .... delete to end of line (borrar hasta el final de la línea)