GEA JP989 Manual Del Propietario E Instrucciones De Instalación página 11

Cleaning the glass cooktop.
Clean your cooktop after
each spill. Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE Cleaning
®
Pad for Ceramic Cooktops or a
Scotch-Brite Multi-Purpose No
®
Scratch blue scrub pad.
The CERAMA BRYTE ® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE: Do not use a dull or
nicked blade.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE ® Ceramic Cooktop Cleaner.
This helps protect the top and
makes clean-up easier.
Daily use of CERAMA BRYTE
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
the pad included with your cooktop.
Allow the cooktop to cool.
Spread a few drops of CERAMA
BRYTE ® Ceramic Cooktop Cleaner
to the entire burned residue area.
Using the included CERAMA
BRYTE ® Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45°
angle against the glass surface and
scrape the soil. It will be necessary
to apply pressure to the razor
scraper in order to remove the
residue.
® Ceramic Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE
directly to the cooktop.
Use a paper towel or CERAMA
BRYTE
Cooktops to clean the entire
cooktop surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
®
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
and a paper towel.
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE
Cooktop Cleaner to the entire
burned residue area. Use the
CERAMA BRYTE
to remove any remaining residue.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
and a paper towel.
GEAppliances.com
® Ceramic Cooktop Cleaner
® Cleaning Pad for Ceramic
® Ceramic Cooktop Cleaner
® Ceramic
® Cleaning Pad
® Ceramic Cooktop Cleaner
11