RealFlame 1330 Manual Del Usuario página 8

Step 4: Select the wall location where you want to hang your electric
fireplace. Hold the mounting bracket to the wall and draw a horizontal
line using a level and mark 4 drill holes for the anchor screws.
See Fig. D
3
Step 5: Drill 4 holes 5/16in(8mm) in diameter and 2.2in(56mm) deep
on the marked locations. For the holes that do not hit a stud, use the
supplied wall anchors. Install the wall anchors into the holes and gently
tap them into place with a hammer until the flange of the wall anchor
is flush with the wall surface. See Fig. E.
2
INSTALLATION (Cont'd.)
Fig. D
2
Fig. E
56 mm
Fig. E
8