Switch Off; Standby Mode; Diopter Adjustment; Switching The Image Mode - Liemke KEILER PRO 2020 Manual De Instrucciones

Idiomas disponibles

07. SWITCH OFF

> Switch off the device by long pressing the Power button.

A count-down timer appears in the display, counting from 3 to 1

and then the device switches off.

If you release the Power button during the countdown, the device

will remain switched on.

To increase the battery life, the device can be put into standby

mode.

> When the device is on, short press the Power button to enter the

standby mode.

The green indicator light will flash every 2 seconds.

> Short press the Power button again to wake up the device from

the standby mode.

Waking up the device is instant, there is no waiting time compared

to switching on the device after it has been switched off comple-

tely.

The diopter adjustment adjusts the eyepiece of the device to the

individual user's eyesight.

> Close the lens cover and turn the eyepiece/diopter adjustment

clockwise or counterclockwise until the symbols on the display

appear clearest for your personal eyesight.

> Short press the Image Mode button to switch the image mode

from white hot, black hot, red hot, false color and target high-

light mode.

01.

01. White Hot ideal for accurate identification

02. Black Hot ideal for quick spotting

03. Red Hot for fast detection of heat sources

04. False Color for detection at close range, for example thermal

bridges

05. Target Highlight reduces the overall brightness and thus glare

> Short press the Zoom button for image zooming from 1× to 2x, 4x

and back to 1x.

02.

03.

04.

05.

Tabla de Contenido