Bosch FCA-320-Relay Guia De Instalacion página 9

FCA-320-Relay
Installation
NOTICE!
The relay module is only compatible with devices from the FCS-
320-TM series.
Install the relay module in suitable housing directly adjacent to
the aspirating smoke detector.
See Figure 1, Page 4
1
2
3
4
5
6
7
-
-
-
See Figure 2, Page 4
X1-X5
X9
X8
Bosch Sicherheitssysteme GmbH
Connection terminals
Data communication display
Installation bores
Localization relay display
Data bus fault display
Data bus fault display
Activation jumper for localization relay 1–5
Install the housing directly adjacent to the aspirating
smoke detector.
Fix the relay board in the housing.
Connect the relay board and close the housing.
Localization relay contacts, room 1 to 5
+24V +24 V power supply, incoming
0V 0 V power supply, incoming
Data A Connection A data bus, incoming
Data B Connection B data bus, incoming
+24V +24 V power supply, outgoing
0V 0 V power supply, outgoing
Data A Connection A data bus, outgoing
Data B Connection B data bus, outgoing
en
F.01U.142.129 | 1.0 | 2009.11
9