II
For grinding/milling
1. Place the motor base on a flat, level, stable surface. Ensure the power cord is unplugged.
2. Fill the small size cup with the ingredients that you wish to grind,
such as( coffee
beans,nuts,cinnamon stick,dried fruits etc.)
3. Screw the Pulverizing Blade Assembly onto the small size cup in clockwise direction and
tighten to seal.
4. Position the cup assembly onto the motor base and turn anti-clockwise to align cup tabs with
corresponding slots on the motor base ( Turning anti-clockwise will ensure that drive cog on the
cup assembly will always align properly with drive gear on the motor base ).
At this stage DO NOT push the cup down and don't lock it into position (As it will start
immediately if already plugged into Power supply ).
5. Plug in the appliance cord , switch On at wall outlet .The appliance is now ready to Operate.
Whilst operating appliance hold it steady by placing one hand on appliance base and other
hand on the cup.
6. On completion of the grinding process , release downward pressure on cup the (pulse ) or
unlock the cup ( Continues operation ) by turning anti-clockwise .
Remove the cup from the motor base and switch off and unplug from power outlet if there is
no further need for immediate use.
7. After removing the cup from the motor base, place the cup upside down and unscrew the
blade assembly from the cup in anti-clockwise direction.
8. Tip ground ingredients into separate container or alternatively ( If not immediately using )
simply place the storage lid onto the small cup to keep contents fresh for later use.
9. Where appliance is not used to process more batches , switch your Nutrition Blender Off and
unplug it from the wall outlet until next use.
NOTICE:
● The la ge a d Mediu
size ups a e for blending and Storage use . The small size cup should
only be used for grinding /milling functions .
● Al ays ake su e that seal is p ope ly seated i the i
efo e tighte i g.
● Fo
est g i di g/
illi g pe fo
ance limit the quantity of ingredients in cup to a maximum
of 150 grams.
● O e the Nut itio
le de
is connected to the power supply it can only be operated by
pushing the cup down ( For short pulsing ) or pushing it down and turning clockwise to lock, On
/ Off Switch doesn't exist.
8