VOX electronics NB-901 Manual De Usuario página 7

Guidance
I For blending:
1. Place the Motor Base on a flat, level, stable surface. Ensure the power cord is unplugged.
2. Clean and cut all solid ingredients into pieces small enough to fit and place into a Large or
Medium size Cup, then pour in liquid ingredients.
3. Ensure the seal ring is seated properly on the Pulverizing Blade subassembly, then screw on
pulverizing blade assembly in clockwise direction onto cup and tighten to seal.
4. Position the cup assembly onto the motor base and turn anti-clockwise to align cup tabs with
corresponding slots on motor base ( Turning anti-clockwise will ensure that the drive cog on
cup assembly will always align properly with drive gear on the motor base ).
At this stage DO NOT push the cup down and don't lock it into position(As it will start
immediately if already plugged into Power supply ).
5. On completion of the blending process , turn the cup anti-clockwise ( If locked in ) and /or
release downward pressure on cup ( Pulse position ) to turn off .
Remove the cup from the motor base and if not using Nutrition Blender any further , switch off
at power outlet and unplug the cord ( Do not leave plugged in if not in use ).
7. After removing the cup from the motor base, place cup upside down and unscrew blade
assembly from the cup in anti-clockwise direction. Pour mixed contents into a separate
container or simply screw a sipping ring onto the cup and consume contents directly from it.For
later consumption you can alternatively screw a storage lid onto the cup and place the cup into
refrigerator .
NOTICE
:
●
Once the appliance is connected to a power supply it can only be operated by pushing the cup
down ( For short pulsing ) or pushing down and turning clockwise to lock, On \ Off switch
doesn't exist.
●If the Blade is not running smoothly, stop the appliance to add more liquid or alternatively
reduce the amount of solid ingredients in the cup.
7