Installer System Test; System Status - Honeywell FocusPRO TH6000 Serie Guia De Instalacion

Installer system test

To begin, press and hold the
buttons until the display changes.
t
System test
10 Heating system
20 Emergency heating
system
30 Cooling system
40 Fan system
CAUTION:
equipment damage, avoid cycling the compressor quickly.
69-2738EFS—03
s

System status

0 Heat and fan turn off.
1 Stage 1 heat turns on. Fan turns on if Setup Function 1 is set to 1,
5, 9 or 10 OR Setup Function 3 is set to 1 **See page 6
2 Stage 2 heat turns on
3 Stage 3 heat turns on
0 Heat and fan turn off
1 Heat and fan turn on
0 Compressor and fan turn off
1 Compressor and fan turn on
2 Stage 2 compressor turns on
0 Fan turns off
1 Fan turns on
Compressor protection is bypassed during testing. To prevent
Test number
and
Press
Press NEXT to advance to next test.
Press DONE to terminate system
test.
8
System status
10
/ to turn system on/off.
s t
0
MCR29455