Kohler K-9530 Guía De Instalación Y Cuidado página 4

Spout 1/2" Nominal
(5/8" OD)
3/4"-14 Hot or
Cold 1/2"
NPSM
Nominal
Thread
(5/8" OD)
Hot or
Cartridge
Cold 1/2"
Nominal
1/2"-14 NPSM
(5/8" OD)
Thread
Handshower 3/8"
Nominal (1/2" OD)
Deck-Mount
1. Diverter Configurations
Configurations for Deck-Mount Installations
The small port is for the handshower (or showerhead).
The port directly across from the small port is for the bath spout.
Default flow is through this port.
The remaining two ports are for the hot and cold water inlet
supplies. They are interchangeable. If only one of these ports is
needed, cap the other port.
Configurations for Wall-Mount Installations
When diverting between the bath spout and handshower (or
showerhead):
The small port is for the handshower (or showerhead).
The port directly across from the small port is for the bath spout.
Default flow is through this port.
1229813-2-A
1/2" Nominal (5/8" OD)
3/4"-14 NPSM Thread
From Mixer
3/8" Nominal (1/2" OD)
1/2"-14 NPSM Thread
Review instructions for
specific configurations.
4
Showerhead
or Bath Spout
From Mixer
Cartridge
Handshower or
Showerhead
Wall-Mount
Kohler Co.