Function Operation - Mixcder E10 Manual Del Usuario

10. Protecting your Hearing
The Headphone is held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphone
and avoiding exposing yourself continuously to high
volumes. If you need to use the headphone for a long
period, rest ten minutes for a half hour using.
11. Control Instructions
Function
Power on
Power off
Increase Increase
Pairing
volume volume
Increase
Decrease
volume
volume
Decrease
Play media
volume
Pause/restart
Play music/video
media playback
Pause/restart
Skip to next
music/video
track
Skip to next
Skip to previous
track
track
Skip to previous
track Answer a call
Answer a call
End a call
Noise Canceling
End a call
On
Noise Cancelling
On/OFF
Operation
When the headphone is off, press and hold the power
button for 3 seconds, and you will see the blue light
flash and hear "power on".
When the headphone is on, press and hold the power button
for 3 seconds, and you will hear "power off".
Press and hold the power button for about 5 seconds til the
When the headphone is on, press and hold the power button
Press the Volume Up V+ button
red and blue light flash alternatively, and you will hear "paring"
3 seconds, and the LED flashes red and sounds a prompt..
Press the Volume Down V- button
Press the Volume Up V+ button
Press the power button
Press the Volume Down V- button
Press the power button
Press the power button
Press the power button Press and hold the V+ button for 1-2s
Press and hold the V+ button for 1-2s
Press and hold the V- button for 1-2s
Press and hold the V- button for 1-2s
Press the power button to answer the call.
When a call rings, press the power button
Press the power button
Press the Noise-Canceling Button to ON, Blue LED
When a call is ended, press the power button
light on.
1、Once power on, then active noise cancelling
function will on, led blue on
2、Pressing the ANC button at power-on will turn off
the noise reduction, and then press the ANC button to
turn on the noise reduction.
EN-8