• If the length of the power cable is insuffi cient, contact customer service to obtain a
longer cable. Do not attempt to extend the cable yourself.
• For air conditioning systems without a mains plug, an isolating switch must be
installed in the cable.
• If you wish to use the air conditioner in a different location, have the disassembly
and new installation carried out by a qualifi ed person. Otherwise, property
damage and/or personal injury could result.
• Select an installation location that is out of the reach of children and at a safe
distance from plants and animals. If this is not possible, you should erect a fence for
safety reasons.
• The indoor air conditioner should be installed close to the wall.
• Installation instructions for this unit are provided by the manufacturer.
Special instructions
• Only use methods recommended by the manufacturer to speed up the defrosting
process or carry out cleaning.
• If repairs are required, contact customer service. Repairs carried out by unqualifi ed
personnel can be dangerous.
• The unit should be stored in a room that is not permanently exposed to potential
sources of ignition, such as naked fl ames, a powered gas appliance, or an electric
heater.
• Do not puncture or burn the appliance.
• The appliance has been fi lled with the fl ammable gas R32.
• Follow the operating instructions exactly when carrying out repairs.
• Be aware that the refrigerant is odorless. Read the relevant operating instructions for
the refrigerant.
• If any of the phenomena listed below should occur, turn off the air conditioner and
immediately unplug the power cord from the wall outlet and contact Customer
Service or a similarly qualifi ed person for repair and maintenance:
- The power cord is overheated or damaged,
- The circuit breaker is regularly activated,
- The air conditioner emits the smell of combustion,
- There's a leak in the air conditioner.
CAUTION
Risk of injury! Do not repair or service the air conditioner yourself. Using
the air conditioner in abnormal conditions may result in malfunction,
electric shock or fi re.
EN
65