Part Names And Functions - Denon DCD-SA1 Instrucciones De Operación

ENGLISH

2 PART NAMES AND FUNCTIONS

(1) Front Panel
q
POWER switch
• Press once to turn the power on.
• If a disc is loaded when the power is turned on, playback
starts automatically.
• Press again to set to the "OFF" position and turn the power
off.
w
SUPER AUDIO CD SETUP button
• Use this button to switch the layer of the Super Audio CD and
to set the top priority playback layer.
• The name of the newly set layer is shown on the display each
time the button is pressed.
STEREO
STEREO:
The Super Audio CD's layer (stereo) is played.
PCM CONV.:
The Super Audio CD's (stereo) DSD signals are converted
into PCM format and played.
CD:
The CD layer is played.
✽ For details on "Setting the Top Priority Playback Layer for
Super Audio CDs" (page 12).
e
DIGITAL OUT button
• Use this to turn the digital output on and off.
r
MODE knob
• Use this to select the program source to be output.
NORMAL:
The source played on the set is output.
PURE DIRECT:
Both the digital output and the display are turned off. In the
PURE DIRECT mode, neither the DIGITAL OUT button on
the main unit nor the DISPLAY button on the remote
control unit function.
EXT. IN COAXIAL:
The program source connected to the digital input jack
(COAXIAL) is output.
EXT. IN OPTICAL:
The program source connected to the digital input jack
(OPTICAL) is output.
(2) Rear Panel
!5
Digital output jack (OPTICAL)
• Digital data is output in optical form from this jack.
• Connect using an optical fiber cable (commercially available).
✽ With Super Audio CDs, no digital signals are output.
!6
Digital output jack (COAXIAL)
• This jack outputs digital data.
• Connect using a commercially available 75 1/ohms coaxial
pin-plug cord intended for digital audio connections.
✽ With Super Audio CDs, no digital signals are output.
!7
Digital input jack (OPTICAL)
• Digital data is input in optical form to this jack.
PCM CONV. CD
(See page 3.)
t
Remote control sensor
• This sensor receives the infrared light transmitted from the
wireless remote control unit.
• For remote control, point the supplied remote control unit
RC-997 towards this sensor.
y
Display
• Refer to page 9.
u
Disc holder open/close button (
• Press this button to open and close the disc holder.
i
Automatic search forward button (
• Press this button to move the pickup forward to the beginning
of the next track. Press again to move ahead to other tracks.
o
Automatic search reverse button (
• Press this button to return the pickup to the beginning of the
present track. Press again to return to other tracks.
!0
Stop button (
• Press this button to stop playback.
!1
Play/Pause button (
• Press this button to start playback the disc.
• When pressed while the disc holder is open, the disc holder
closes and playback starts.
• Press this button to stop playback temporarily.
!2
Disc holder
• Load discs here. (See page 11.)
• Press the disc holder open/close button
the disc holder.
• The disc holder can also be closed by pressing the play/pause
!1
button .
!3
Super Audio CD indicator
• This indicator lights when playing a Super Audio CD.
!4
Advanced AL24 Processing indicator
• When a CD is loaded or the Super Audio CD's CD layer mode
is set, the Advanced AL24 Processing circuit (which
reproduces analog waveforms) is activated and this lights.
This also lights when digital data is input from one of the
external inputs (OPTICAL or COAXIAL).
!8
Digital input jack (COAXIAL)
• Digital data is input to this jack.
!9
Power input (AC IN)
• Connect to an AC power supply using the included power
supply cord.
@0
Analog output jacks (XLR BALANCED)
• Use these jacks for connection to the amplifier's balanced
input jacks.
• Connect using a Cannon connector (XLR-3-32 type) cord
(commercially available).
@1
Analog output jacks (RCA UNBALANCED)
• Connect these to the amplifier's input jacks.
• Connect using the included RCA pin-plug cord or a
commercially available connection cord.
8
5
)
9
)
8
)
2
)
1 3
/ )
u
to open and close