Polaris 7240 Sport El Manual Del Propietario página 7

1. Seat the control unit firmly in the control unit base (Figure 1).
1
Figure 1. Connect Control Unit Base
2. Unscrew the protective cap for the floating cable from the side of the
control unit by turning counter-clockwise (Figure 2).
Figure 2. Remove Protective Cap
3. Align the notch in the floating cable connector with the key in the control
unit, engage then turn clockwise to tighten (Figure 3).
Figure 3. Connect Floating Cable
2
"CLICK"
Align:
Key with Notch
Page 7