Call Transfer; Call Forward - Yealink W52P Guia De Inicio Rapido

E
N
G
Call Mute
L
I
Press during a call to mute the call.

S
Press again to un-mute the call.

H
Call Hold and Resume
To place a call on hold:
Press the Options soft key during a call, and then select Hold.
To resume a call, do one of the following:
If there is only a call on hold, press the Resume soft key.

If there are two calls on hold, press the Resume soft key to resume the current call, press the Swap soft key to swap

between calls.

Call Transfer

You can transfer a call in the following ways:
Blind Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key.
Semi-Attended Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press to dial out.
4. Press the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press to dial out.
4. Press the Transfer soft key after the call is answered.

Call Forward

To enable the call forward feature on a specific line:
1. Press the OK key to enter the main menu, and then select Call Features->Call Forward.
2. Press or
3. Press or
Always----Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the line is busy.
No Answer----Incoming calls are forwarded if not answered after a period of time.
4. Select Enabled from the Status field.
5. Enter the number you want to forward the incoming calls to in the Target field.
6. Press or to select the desired ring time to wait before forwarding (only for No Answer Forward) in the After Ring
Time field.
7. Press the Save soft key to accept the change.
6
to highlight the desired line, and then press the OK soft key.
to highlight the desired forwarding type, and then press the OK soft key.