Battery Installation - Aiwa MSBTU-300 Manual De Usuario

10
en

BATTERY INSTALLATION

Battery must be inserted correctly to avoid damage to the remote control. Always remove the battery
when the remote control will not be used for a long period of time, as this will cause leakage to the
battery and subsequently damage the remote.
BATTERY INSTALLATION
Slide out cover and install batteries (included) with polarities as shown:
2 AAA TYPE
Notes:
• If the distance required between the remote control and the appliance decreases, the batteries
are exhausted. In this case replace the batteries with new ones. • The main power button on the front panel of the main unit must be 'ON' in order for the remote
control to operate.
SETTING AND BASIC OPERATION
POWER ON/OFF
To turn on the micro system, press the
button on the front panel of the unit or on
the remote control.
To turn off the micro system, press the
button again.
MUTE BUTTON
(On remote control only)
You can also press the MUTE button on
the remote control to turn off the sound
temporarily, for example, when answering
the telephone.
Press the MUTE button again to cancel
the mute function and restore the sound.
The mute function will also be canceled
automatically by pressing the VOL + or
buttons.
VOL -
SOURCE BUTTON
Press the button repeatedly to
SOURCE
switch among CD/ TUNER/ LINE IN/ BT
modes.
To select the mode please press
USB CD/
USB button on the remote control to switch
into mode.
USB
You can also acces the USB mode with the
buttons of the unit:
Press the button and then
SOURCE CD
MODE . Then the unit will search for a CD,
but if there isn't a CD inside the unit, it will
jump directly to the USB mode.
Please note that this process can take
a few seconds.
VOLUME LEVEL
Turn the knob on front panel
VOLUME
or press VOL + or VOL - buttons on the
remote control to adjust the volume level.
TREBLE ADJUSTMENT
Press or button on
TREBLE + TREBLE -
the remote control to adjust the treble
effect.
BASS ADJUSTMENT
Press or button on the
BASS+ BASS-
remote control to adjust the bass effect.
EQ (EQUALIZER)
Press the EQ button on the remote control
to scroll through the following equalizer
settings: Rock-Pop-Jazz-Classic.
LOUDNESS
Press LOUDNESS button to enhance the
bass level immediately when bass is not
enough.
11