Spracht AURA SOHO Manual De Instrucciones página 12

light will go on and you will hear a dial tone. Wait for 5 seconds, then
press the Power button � again to turn OFF the unit.
3. Next, you will be changing the Aura SoHo™ Conference Phone setting
to VoIP mode. The unit should be in On Hook state, which means no
dial tone, and the keypad back light will be off. Press these keys on
the keypad: 1, 0, 1. The keypad backlight will go on and two tones will
sound. Wait about 5 seconds; the keypad light will go off and then flash
once. The unit is now switched over to VoIP mode and will stay in that
setting the next time you turn the phone on.
4. You can now follow the User Guide instructions for making a call (page 10).
To change back to Analog Phone line mode
You will need to reset the internal counter again. Press the Power button
�. The keypad back light will go on and you will hear a dial tone. Wait for
5 seconds, then press the Power button � again to turn OFF the unit.
The Aura SoHo™ Conference Phone should be in On Hook state, which
means no dial tone, and the keypad back light will be off. Press these keys
on the keypad: 1, 0, 0. The keypad backlight will go on and two tones will
sound. Wait about 5 seconds; the keypad light will go off and then flash
once. The unit is now switched back to Analog phone line and will stay in
that setting the next time you turn the phone on.
Setup
9