RCA ANT1650 Guia Del Usuario página 5

Built-In
Coaxial Cable
2
Converter Box
4
3a
Audio/Video Coaxial
–or–
Cables Cable
TV
To connect the ANT1650 without the
amplifier to a converter box:
ANT1650
1. Make sure your TV is turned off.
2. Connect the ANT1650's built-in coaxial
3. Connect the converter box to your TV
3b
4. Re-scan for channels on your converter
cable to the antenna input on your
converter box.
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b. Coaxial cable connection: Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
box.
Notes: See your converter box's owner's
manual for more detailed connection
instructions. For additional information
about setting up your converter box, visit
www.keepmytv.com
5