Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting the ANT1650
You can use the ANT1650 with or without its amplifier, depending on which connection
gives you the best signal. Try using the amplifier first. If you notice that you've lost channels
that you normally receive, try connecting without the amplifier.
Note: If you find that some channels require the amplifier while others do not, try
unplugging the power supply for the amplifier for those channels not requiring
amplification.
You can connect the ANT1650 directly to your TV or use it with a converter box.
Built-In
Coaxial Cable
Amplifier
Insert
Built-In
Coaxial Cable
ANT1650
2
ANTENNA
TV/STB
3
4
TV
5
ANT1650
2
TV
3
To connect the ANT1650 with the
amplifier directly to your TV:
1. Make sure your TV is turned off.
2. Connect the ANT1650's built-in cable
to the input jack of the amplifier.
3. Connect the amplifier's built-in cable to
the antenna input on your TV.
4. Plug the amplifier's power cord into an
electrical outlet.
Important: This power unit should be
plugged in so that it stays vertical or lies flat.
5. Re-scan for channels on your TV.
To connect the ANT1650 without the
amplifier directly to your TV:
1. Make sure your TV is turned off.
2. Connect the ANT1650's built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
3
Tabla de contenido
