Opis 60s mobile Manual De Uso página 6

Format: *05#<0-1>* (0 – no roaming lock, 1- roaming lock enabled)
Example: to disable roaming connec ons: *05#1*
⇒ if the new se ng is accepted the phone rings once.
If the se ng is not accepted the phone rings twice and you can try again.
⓭ Se ng the speaker level
The speaker level of the receiver can be changed from 1 (lowest) to 9 (highest). Pick up
the receiver and dial:
Format: *06#<1-9>*
Example: to set the speaker level to 5 (medium): *06#5*
⇒ if the new speaker level is accepted the phone rings once.
⓮ Rese ng to factory defaults
You can reset all se ngs above to their factory default values. Pick up the receiver and
dial:
Format: *08*
Example: to reset your phone to the factory defaults: *08*
⇒ if the defaults are restored the phone rings once.
List of all commands
Command
*01#<local area code>* *01#01234*
*02#<1-9>#<phone
number>*
*03#<1-9>*
*04#<0-1>#<PIN>*
*05#<0-1>*
*06#<1-9>*
*08*
*<1-9>
Receiver Tones
You will hear one of 3 possible tones when you pick up the receiver. The following
table explains their meaning.
Type Signal
Silence None
Dial-tone Con nuous toot The phone is ready to accept any dial input.
Example
*02#4#0123456789* Enter/Change a quick-dial number
*03#2*
*04#0#1234*
*05#0*
*06#5*
*08*
*5
Meaning
Phone is not switched on (Note: you have to wait for
5 seconds a er switching on the phone ll a tone is
generated)
6
Func on
Enter/Change a local area code
Change connec on delay
Disable/Enable PIN-lock
Disable/Enable Roaming-Lock
Change loudspeaker volume
Reset to factory defaults
Use quick dial