D-Link DCS-6513 Guía De Instalación Rápida página 12

6. Adjusting the lens 3-axis angel
Adjust the Viewing Angle of the 3-axis
Mechanism
Turn the lens module left and right until the
desired position is achieved; tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the
camera, and turn the lens module up and down
until the desired position is achieved; tighten
the tilt screws once completed.
Turn the lens to adjust the IP camera's image
until the desired orientation is achieved, tighten
the image adjustment screw once completed.
12 D-Link DCS-6513 Quick Install Guide