THERMAL OVERLOAD PROTECTOR
This unit features a thermal overload protector. If unit overheats, it will shut off
automatically. Contact Technical Services for service.
FUSE
This unit includes a fuse on the back side of the unit to protect electric
components from damage and overheating. In the event that the dehydrator
stops functioning or will not maintain its temperature consistently, you make need
to check the fuse.
1. Turn the ON/OFF Switch OFF ( ). Unplug power cord.
2. Allow the Dehydrator to completely cool before attempting to move the
Dehydrator to access the back of the unit.
3. Unscrew the fuse and inspect the fuse to check for signs of burning or
damage.
4. If you suspect the fuse is damaged, please call Customer Service for a
replacement fuse.
CLEANING INSTRUCTIONS
Electrical Shock Hazard. Before cleaning or servicing the
w WARNING
Dehydrator, make sure it is unplugged from the power source. It is important to
read and fully understand all of the instructions and safeguards prior to use of the
Dehydrator.
1. Clean Racks and inside Cabinet before using Dehydrator for the first
time and after each use.
2. Turn ON/OFF Switch OFF ( ). Unplug.
3. Allow Dehydrator to completely cool before cleaning.
4. Remove Racks from Cabinet.
5. Wipe the Cabinet clean, inside and out, with damp sponge or soft cloth.
Be careful not to splash water onto heating element (located behind the
screening and fan in the back of the Cabinet) while cleaning inside of
Cabinet. Water could damage the heating element and increases the
risk of electric shock. DO NOT immerse the Dehydrator in water.
6. Clean Racks with warm, soapy water. Rinse with clear water and dry
immediately.
SANITIZING
1. Sanitize removable dehydrator parts daily.
2. Sanitize parts in accordance to NSF/ANSI standards.
3. After unplugging unit, wipe exterior with soft cloth, wet with water and a mild
detergent. Repeat with a clean, soft, damp cloth and dry.
7