Ariston TELECOMANDO MEMORY Manual Del Usuario página 28

GB
SLEEP/INTELLIGENT EYE function
Keep this button pressed for at least 2 seconds to activate the SLEEP function.
By keeping it pressed for more than 2 seconds, the INTELLIGENT EYE function is acti-
vated.
• The Sleep function allows the unit to automatically increase (cooling) or decrease
(heating) the temperature by 1°C an hour for the fi rst two hours, to then remain con-
stant for the next 5 hours and fi nally shut down. In this way it is possible to maintain
an optimal temperature in terms of both comfort and energy saving.
NOTE: The SLEEP function is only available in cooling, heating and AUTO mode.
• The Intelligent Eye function allows the air conditioning unit to enter the stand-by
mode if it does not detect any activity for more than 30 minutes. The unit reactivates
automatically with the previous settings as soon as the presence of people is identi-
fi ed.
The air conditioning unit deactivates this function each time it is turned off or the
SLEEP, SELF CLEAN or TIMER button is pressed.
LED/FOLLOWME function
Keep this button pressed for at least 2 seconds to activate the LED function which turns
off the display of the internal unit.
By keeping it pressed for more than 2 seconds, the FOLLOW ME function is activated.
• By activating the Follow Me function, the remote control system detects the actual
temperature in the room where it is located and sends this signal to the air condi-
tioning unit every 3 minutes, until the FOLLOW ME button is not pressed again.
• The Follow Me function is not available in DRY and FAN mode.
• By switching to a different operating mode or turning off the unit, the Follow Me
function is automatically deactivated.
TURBO/SELF CLEAN function
Keep this button pressed for at least 2 seconds to activate the TURBO function. By
keeping it pressed for more than 2 seconds, the self clean function is activated.
• The Turbo function allows the unit to reach the preset temperature in the shortest
time possible. When the unit is in cooling or heating mode, by pressing this button a
strong air flow is activated with the fan at maximum speed.
• In SELF CLEAN mode, the air conditioning unit automatically cleans and dries the
evaporator, keeping it in optimal conditions for subsequent operation. (through a
fan, heating, low speed fan cycle). The Self Clean function is only activated in cooling
or dry mode.
28