Average Test Results - AgraTronix MT-PRO Manual De Instrucciones

avERaGE TEST RESuLTS

1. When testing grain, the test result
is displayed for about ten seconds.
During the period that the test
moisture % and temperature is
displayed, press the MEMORY
button (A). The tester will
acknowledge that it has entered the
reading into memory, by displaying
the current average and then the
number of stored readings. Up to
20 readings can be stored into
memory. If the maximum number
of readings has been reached,
the tester will not allow any more
readings to be stored.
NOTE: Averaging is stored for
one grain only. When a test for a
new grain is performed, existing
averaging data for the previous
grain is erased when the new
grain's averaging data is taken.
Averaging data is retained even
if batteries are removed.
2. Press the AVG button (B)
to display the average of all
results entered for the grain
being tested.
3. To clear the averaging, press
the AVG button. The current
average will be displayed. Then
press the CLEAR button (C)
and the tester will then display
0.0% (0). This indicates that the
averaging has been cleared.
Operation
05-5