Network Connection; Before Installation; Installation Procedure - Canon imageRunner C1028i Guía De Inicio

3 Set up Computers and Software

Network Connection

• The following procedures are explained using sample screens from Windows XP Professional.
• Log on as an Administrator to install the software.
• Make sure the machine is turned ON. (See "Turn on the Machine," on p. 3.)
• Make sure the network cable is connected to the machine.
• If you want to use the machine as a network scanner, it must be connected to a computer over
an IPv4 network.
• Make sure an IP address is assigned to the machine.
(See "Check IP address Setting," on p. 21.)
• Click on the circled button on each screen to proceed to the next step.
Installation Procedure
1
Connect the machine to the
network correctly, and conirm
that the power is on.
2
Insert the UFRII LT/FAX User
Software CD-ROM.
–
If you want to install only the
PCL Driver, proceed to step 37.
For more information refer to
the Printer Driver Installation
Guide (located on the PCL User
Software CD-ROM).
–
If you want to install only the PS
Driver (when the optional PS
Printer Kit is attached), proceed
to step 56. For more information
refer to the Printer Driver
Installation Guide (located on
the PS User Software CD-ROM).
26
Before Installation
3
If the CD-ROM Setup screen is not
displayed, click [start] on the
Windows task bar → [My
Computer].
Windows 2000: double-click [My
Computer] on the Windows
desktop.
Windows Vista/7/Server 2003/
Server 2008: click [Start] on the
Windows task bar → [Computer]
([My Computer]).
Open the CD-ROM icon, then
double-click [MInst] ([MInst.exe]).
If a language selection screen is
displayed before the CD-ROM
Setup screen, select a language
and then click [Next].
4
Make sure that the boxes next to
the UFR II Printer Driver, FAX Driver
(imageRUNNER C1028iF or C1028i
with the optional Super G3 FAX
Board attached), Color Network
ScanGear and Manuals are
checked. Unchecked items will not
be installed.
–
If you want to install only the
UFR II Driver, select only the
UFR II Printer Driver in this step,
then proceed to the next step.
For more information refer to
the Printer Driver Installation
Guide (located on the UFRII LT/
FAX User Software CD-ROM).
–
If you want to install only the fax
driver, select only the FAX Driver
in this step, then proceed to
step 16. For more information
refer to the Fax Driver
Installation Guide (located on
the UFRII LT/FAX User Software
CD-ROM).