Tyres - CLIPIC STREPPER ST50 Manual Del Usuario

Checks and maintenance
3. Apply the brake, release it, and then spin the wheel and
check that it rotates freely. Repeat this procedure several ti-
mes.
4. After adjustment, perform the check and make sure the
cut-out the adjusting nut is seated on the brake arm pin.
Brake shoe wear limit
The front and rear brakes are equipped with external brake
wear indicators. Check for the wear state as following.
There are a reference mark (2) and an arrow (1) on the brake
end cover. Replace the brake shoes if the arrow aligns with
the reference mark (2). If replacement is necessary, see your
CLIPIC dealer to ensure the safety.
TIRES
Tire inflation pressure and the general tyre condition are ex-
tremely important to the proper performance and safety of
the vehicle,check your types frequently for both wear and
inflation pressure.
1
2
122
2