Troubleshooting - Duratech Duralink PLP-REM Manual Del Usuario

Troubleshooting

PROBLEM
The PLP-REM doesn't react to
transmitter commands
The pool lights don't work
or don't change colors
correclty
Handheld transmitter does not
function anymore after firmware
update of the PLP-REM for Link-
Touch compatibility
SOLUTION
• Perform a RESET procedure
• Check the battery of the handheld
transmitter (see p 11)
• The transmitter is not paired-
correctly with
Repeat the pairing process
• Reduce the
handheld transmitter and PLP-REM
and/or remove obstacles
• Check the General status light on
the logic board. If it's red, then
the secondary voltage is too high
(>14VAC) or there is a short circuit
• Perform a RESET procedure
• Check if all connections are made
according to the electrical scheme.
• Switch the PLP-REM to ON/OFF
mode (DIP switch nr 1) and check if
the lamps work
• Buy a new TX868 transmitter that
has updated firmware
the PLP-REM.
distance between
19