Further Information; Product Disposal - Packard Bell Maestro 230 LED HD Manual Del Usuario

F
URTHER INFORMATION
For further information, a fully comprehensive guide is available from the Packard Bell InfoCentre* or
on the Internet from the support section of the Packard Bell website at www.packardbell.com
*Available for monitors purchased as part of a complete Packard Bell computer system only.
D
RIVERS
Under normal circumstances your computer will be equipped with the necessary drivers for the
Packard Bell monitor. However if your computer does not already have these drivers you may
download them from the support section of the Packard Bell website at www.packardbell.com
T
ROUBLE SHOOTING
Immediately unplug the monitor from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
If the power supply cord or plug is damaged
If liquid has been spilled or objects have fallen into the monitor
If the monitor has been exposed to rain or water
If the monitor has been dropped or the cabinet is damaged
Before you call a Packard Bell Authorized Service Provider, please check the following items:
I have no picture and the power indicator is not lit .
Check if the AC Power Cord is plugged in correctly on both ends and the power switch is on.
Check if the signal cable is plugged correctly into the computer and if the cable is not damaged.
I have no picture and the power indicator is lit.
Your computer may be in Power Down or Sleep mode. This is a temporary status in which your
computer and monitor reduce power consumption. Try moving the mouse a little bit, or press the
space key on your keyboard and wait for a few seconds.
It is also possible that the Brightness of your monitor has been set too high or too low.
Check if you are using a display mode that is supported by the monitor.
Turn the monitor off and back on to see if this resolves the problem.
Make sure that the computer is switched on.
The image is unstable.
Isolate and eliminate nearby sources of electric or magnetic fields.
Set your computer to a supported video mode; see the documentation included on the supplied CD
for more information.
Try plugging the monitor into a different, earthed, power outlet, preferably on a different circuit.
Check the display settings of your computer. Make sure that a supported mode is selected.
The message "Check Cable" appears on the screen.
Make sure that the analogue video cable is correctly plugged into the Analogue Video port on the back
of the monitor.
Make sure that the other end is correctly plugged into the VGA connector of your computer.
P
RODUCT DISPOSAL
The 2002/96/EC Directive, known as Waste Electrical and Electronic Equipment (WEEE)
Directive, requires that used electrical and electronic products must be disposed of
separately from normal household waste in order to promote reuse, recycling and other
forms of recovery and to reduce the quantity of waste to be eliminated with a view to
reducing landfill and incineration.
The crossed-out dustbin logo is there to remind you that these products must be sorted separately for
disposal. These rules concern all your Packard Bell products (computer, monitor, GPS, MP3 player,
external hard drive) and also all accessories, such as keyboard, mouse, speakers, remote control, etc.
When you have to dispose of such products, make sure that they are correctly recycled by checking
with your local authority, or by returning the old equipment to your retailer when you replace it.
For information, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm
http://www.acer-group.com/public/Sustainability/sustainability04.htm
Maestro 230 LED HD
4 -